Tellabs 131 Wall Optical Network Terminal (ONT131W) 3 Ethernet Ports 1 POTS GPON

Description

Tellabs 131 Wall Optical Network Terminal (ONT131W) 3 Ethernet Ports 1 POTS
Item Description
Buyer will receive
1
Tellabs 131 Wall Optical Network Terminal (ONT131W) 3 Ethernet Ports 1 POTS
The Tellabs 131 Wall Optical Network Terminal (ONT131W) offers 3-ports of Ethernet and one (1) analog voice POTS for true enterprise applications inside buildings and outside across a far reaching campus. It offers flexible choices for indoor and outdoor mounting, plus in-wall and above-ceiling connectivity for the modern enterprise LAN.
Three (3) 10/100/1000 RJ-45 Ethernet support and one (1) RJ-11 analog voice POTS
Meets industrial temperature ratings for ubiquitous indoor and outdoor connectivity
In-wall mounting into standard dual gang electrical box for clean aesthetically pleasing appearance
Enterprise grade G-PON ITU-T G.984 implementation
3rd Ethernet port and power connection from the backside of ONT for in-wall and above-ceiling connectivity needs
Plenum rated for mounting in air handling spaces
Advanced IP and Ethernet Functions
Supports IP-based voice, all forms of enterprise IP-based data traffic and all forms of enterprise IP-based video traffic
Powering Options
Remote powering can be accomplished with 48V feed that can be connected at the rear of the ONT via a 2-wire phoenix style connector.
Mounting Choices
The Tellabs 131W ONT can be desktop or wall mount. In-wall mounting can be provided using standard dual or single gang electrical box. This ONT is also plenum rated for mounting in air handling spaces. It also supports industrial temperature ratings allowing both indoor and outdoor mounting locations. There are four holes in the ONT that extend through the faceplate to the back of the ONT and are used to secure the ONT into a standard dual or single gang electrical box.
Power over Ethernet (PoE)
With PoE functionality, the Tellabs 131W ONT connects to any Powered Device (PD) such as IP-Phones, IP-Camera, and other equipment that can be powered from the Ethernet port. Both IEEE 802.3af PoE and high-power PoE+ IEEE 802.3at, including Class-4 negotiations can be selected on per port basis. The maximum PoE power is 30 watts, spread across two Ethernet ports.
Centralized Management
All features and functionality can be defined in software and dynamically allocated, based on real-time needs. Being controlled by the Tellabs Panorama PON Manager helps speed installations and daily operations. Centrally controlled by the Tellabs Panorama PON Manager, the Tellabs 131W ONT supports auto-discovery mechanisms, can be quickly provisioned using global templates and profiles, and offers smart troubleshooting tools, all of which allow for speedy moves, adds and changes for everyday operations.
Video
Packet based interactive IPTV services including multicast video and video-on-demand is supported on the Tellabs 131W ONT. This is inclusive of IGMP v2 plus v3 proxy, and MAC level ITU 802.1p QoS standards for streaming IP video and IPTV content delivery.
Voice
The Tellabs 131W ONT supports Plain Old Telephone Services (POTS) analog voice over one RJ-11 connectors. This means that VoIP Softswitch or CLASS 5 based high quality voice service through one POTS line or VoIP access through one of three Ethernet interfaces can be utilized. Proven interoperability with major soft switch manufacturers. Interoperability certification has been completed with Metaswitch and BroadSoft.
Advanced IP and Ethernet
Tellabs 131W ONT offers industry-leading software-defined traffic management, security, provisioning and quality of service mechanisms. True enterprise advanced IP and Ethernet protocols are supported for ultimate LAN security, scalability and operational efficiencies.
Physical
Height: 5.45 in / 139 mm
Width 5.45 in / 139 mm
Depth: 1 in / 25.4 mm
Weight: 1.5 lb / .7 kg
Interfaces
Two (2) RJ-45 / Gigabit Ethernet w/PoE
One (1) RJ-45 / Gigabit Ethernet
One (1) RJ-11 connector
One (1) SC-APC / G-PON (G.984) uplink
Power
Input at ONT (volts): 50-57Vdc
Consumption Idle (watts): 10 W
Max PoE Power via remote power: 30W
Dying Gasp support
Remote Power Options
ONT Power Connector: Phoenix
Power over Ethernet (PoE)
Max Power Delivered (Watts): 30W
Power over Ethernet, both PoE and PoE+ enabled on two (2) ports
Both IEEE 802.3af PoE and high-power PoE+ IEEE 802.3at, including Class-4 negotiations
Alarm / Monitor / Test
OMCI
Dying Gasp
Environmentals
Temperature: -40°C/-40°F to +60°C/140°F ambient
Humidity: 5% to 90% non-condensing
Voice
RJ-11 connector
5 REN per line, Loop start, Balanced and unbalanced ringing
Country specific coefficients and tones
SIP (RFC 3261)
DTMF dialing and encoding by RELAY or IN-BAND method
CLASS service support (Caller ID, Call Waiting, Call Forwarding, Call Transfer etc.), G.711 (μ & a law), G.726-32, G.722, G.729
Echo Cancellation
T.38 and IN-BAND Fax
Voice Activity Detection and Comfort Noise Generation
DHCP Client for voice IP assignment
Compliance
Safety: UL/CSA 60950, IEC 60950, ETSI
FDA FCC 47 CFR Part 15, Class B and FDR 21 CFR 1040.10 and 1040.11 Class 1
EMC: FCC PART 15, SUBPART B, CLASS B
EN 55022, EN 55024, EN 300 386, CLASS B
UL 2043 for Plenum Installation
CE: Compliant
RoHS6: Compliant
WEEE: Compliant
IP/Ethernet Network
Three (3) 10/100/1000Base-T Gigabit Ethernet RJ-45 connectors
RJ-45 IEEE 802.1 10/100/1000 Base-T interfaces
MDI/MDIX auto-sensing and auto-negotiation
802.1d Ethernet bridging and switching
802.1p marking/remarking, DSCP mapping
802.1Q including VLAN translation, filtering, tagging, stacking (QinQ)
Up to 256 multicast groups
IGMP v2/v3 Snooping with immediate leave
Downstream Flow and port-based Rate Limiting
Customer configurable bandwidth and Class of service
Customer configurable bandwidth and Class of service
IGMP v2 and v3 proxy
IEEE 802.1d transparent bridge (RFC-2684)
Passive Optical Network
2.5 Gbps downstream and 1.244 Gbps upstream
Optical wavelengths: 1490 +/-10nm Rx, 1310 +/-20nm Tx
Launch power: 0.5 to +5 dBm
Receiver Sensitivity: -27 dBm
Input power overload: -8 dBm
Received optical power monitoring
ITU-T G.984.4 / G.988 management
Serial number discovery
ITU-T G.984 / G.988 compliance
DBA support via mode-0 DBRu (piggy-back) reporting
Downstream Advanced Encryption Standard (AES) support
Forward Error Correction (FEC)
Upstream Traffic Management using Priority-based or Rate-controlled scheduling
Support for up to 8 T-CONTS with multiple priority queues per T-CONT
Multiple GEM ports with flexible mapping between TCONTs and Priority queues
pBit based GEM port and upstream Priority queue selection
IPTV traffic filtering (Multicast GEM port)
Operations, Administration and Maintenance (OAM) remote firmware upgrade and automatic rollback
LED Indicators
Power
Battery
Fail
LAN Data (traffic and alarm)
Management
POTS
Management
Tellabs Panorama PON Manager
ONT has no local management access
Software Support
Minimum base software SR31.x and higher
Holds two versions of software with image integrity checking and automatic rollback
Tellabs Panorama PON Manager
Installation
Mounting options in-wall and enclosure (sold separately)
OLTs supported are OLT1150, OLT1150E, OLT1134AC, OLT1131, OLT6, OLT1, OLT-mini
Item Condition
New opened box.
Payment Policy
Please pay within 24 hours of checkout. We accept PayPal only, unless the item is being picked up in person. In that case we accept cash.
Shipping Policy
Your item will be shipped within 24 unless your purchase is on the weekend or National holiday. If your purchase takes place on the weekend or National Holiday, we will ship your item on the next business day.
We will not ship to a
different address
than your confirmed address. This is against eBay policy to do this.
Returns policy
Returns will be accepted for 14 days after the item arrives at your location.
CONTACT US
Feel Free to ask any questions through eBay messages.
For Company use
441
2021 - t-n-auctions